Tech Specs

• Total harmonic distortion : 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
• Crosstalk : Less than -60dB (Half Power, 8?, 1kHz, Vol max input 150? shunt)
• Presets : 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
• Maximum input voltage : +24dBu
• Input impedance : 20k? (Balance), 10k? (Unbalance)
• I/O Connectors : Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4
• Frequency response : ±1.0dB (1W, 8?, 20Hz to 20kHz)
• A/D D/A Converters : AD/DA: 24-bit linear, 128 times over sampling
• 100V models: Output power; 1kHz Non-clip 20msec Burst Both channels driven : 8?: 1000W x 2
  4?: 1200W x 2
  2?: 700W x 2
• 120V models: Output power; 1kHz Non-clip 20msec Burst Both channels driven : 8?: 1000W x 2
  4?: 1200W x 2
  2?: 700W x 2
• 220V-240V models: Output power; 1kHz Non-clip 20msec Burst Both channels driven : 8?: 1000W x 2
  4?: 1200W x 2
  2?: 700W x 2
• S/N ratio : 101dB (A-weighted, 8?, Gain setting = +14dBu)
• Sampling frequency rate (Internal) : 48kHz
• Latency : 1.5 msec (Analog Input to Speakers)
• Voltage Gain/Sensitivity : 8? Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
• Indicators : POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
• Processors : Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
• Load protection : POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
•