Tech Specs

• Level Meter : 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
• Frequency response : Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
• Inputs : TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
• Phantom power : +48 V
• Outputs : SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
• Control and others : FOOT SWITCH : Effect Mute on/off
• Bus : Stereo: 1, AUX: 2 (Including FX)
• PAD : 30 dB (CH1-4)
• Hi-Z : Supported (CH4)
• HPF : 80 Hz, -12 dB/oct. (CH1–3)
• COMP : 1-knob COMP (CH1–4)
• EQ HIGH : 10 kHz +15 dB / -15 dB (Shelving)
• EQ MID : 2.5 kHz +15 dB / -15 dB (Peaking)
• EQ LOW : 100 Hz +15 dB / -15 dB (Shelving)
• DSP : SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
• Maximum output power @4ohms : 1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
• Equivalent input noise : -117 dBu (Noise is measured with A-weighting filter)
• Load protection : DC-fault
• Maximum output power @8ohms : 1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
• Amplifier protection : Over heat protection, Over current protection, Integral power protection
• Total harmonic distortion : Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
• Residual output noise : Input to SPEAKERS : -66 dBu (40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -80 dBu (20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
•